







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Fullerton Homeowners
If your Fullerton fence is leaning, the pickets are pulling loose from the rails, or the posts have gone soft at the soil line, waiting past the next rainy season usually turns a repair into a full replacement. Fence installation in Fullerton typically runs $3,500 – $9,000 for a standard residential lot, and the number depends on fence type, linear footage, and how much old material has to come out. Our technicians have up to 19 years of experience setting posts in the clay-heavy soils that run through north Fullerton and Anaheim-adjacent blocks, and we put the price in writing before anyone touches a shovel. Call (844) 320-7095 to schedule a free estimate.
What Our Fence Installation Service Includes
Wood Fence
A wood fence is the standard privacy fence in most Fullerton yards: dog-eared or flat-top cedar and pine pickets on treated posts, typically 6 feet tall in rear yards and 4 feet where the city caps front-yard walls. You need one when the existing boards are warped, splintering, or coming off the rails faster than you can nail them back. We set posts in concrete below the frost-suspect zone, space rails to block a sightline rather than just meet code, and document the post depth and footing on the photo record every visit includes.

Chain Link Fence
Chain link is the practical choice for side yards, back-of-lot boundaries, and any run where budget matters more than looks: galvanized or vinyl-coated mesh on steel posts, usually 4 to 6 feet. It goes in when a property line needs a real barrier and a wood or vinyl fence would price the job out of reach. We tension the mesh properly so it doesn’t sag a season later, and we set terminal posts in concrete rather than driving them, because Fullerton’s soil doesn’t hold a driven post through a wet winter.

Vinyl Fence
Vinyl fencing is PVC or composite panels on reinforced posts, built to look like painted wood without the repainting, and it’s the fastest-growing choice along the newer infill streets in Fullerton. You want it when privacy and low upkeep both matter and the HOA or neighborhood pattern calls for a clean, uniform look. We install vinyl fence installation packages from $3,500 – $9,000 depending on height, gate count, and whether the run needs a retaining transition on a slope.

Aluminum Fence
Aluminum fencing is powder-coated picket or flat-top panel on aluminum posts, and it’s the right call for pool enclosures, front-yard boundaries where the city wants visibility, and gate openings that need to stay light. You need it when a wood fence would look heavy against a modern facade or when rust is a real concern. We use aluminum fence installation when the HOA or pool code requires an open design, and we rack the panels to follow grade instead of stepping every section and leaving gaps at the bottom.
Iron Fence
Wrought iron and ornamental steel fencing gives you the security of a real barrier with the sightlines aluminum can’t quite match, and it’s common on older Fullerton properties near downtown and the historic blocks. It goes in when you want a permanent, heavy boundary, a decorative gate, or a fence that matches existing ironwork on the property. We set iron posts in concrete footings sized for the weight, prime and coat any field welds, and check existing panels for rust-through before deciding whether the run can be repaired or needs full replacement.
Fence Repair
Fence repair covers the middle ground between a loose board and a new fence: resetting posts, replacing rails and pickets, re-hanging gates, and fixing storm or vehicle damage on a run that’s otherwise sound. You need it when a section has failed, a gate won’t latch, or a post has started to heave, and the rest of the fence has years left. We tell you honestly when a repair will buy you five more years and when it’s throwing money at a fence that’s already gone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Fence hardware and gate systems come with real brand differences, and knowing where a specific product wears out matters more than a generic spec sheet. On the gate and entry side, we work with PGT and CGI products often enough to know which hinges and latches fail first and which ones hold up to a decade of daily use. On composite and cladding materials that back some privacy fence builds, Boral and CWS components come up on newer Fullerton properties, and we know how those panels take a fastener versus how a cedar picket does.
Wherever a fence or gate brand shows up on your property, we can work with it or around it. Whether you have PGT, CGI, or any other make on the gate and latch side, we can help you source a match, repair what’s there, or spec a replacement that won’t fight the existing hardware.
Signs You Need Fence Installation Right Now
- Posts that move when you push them. A post that rocks at the soil line means the footing has failed or the wood has rotted below grade, and no amount of new pickets will fix it. This is the single most common reason we recommend full replacement over repair.
- Boards pulling off the rails. When pickets come loose faster than you can re-nail them across a whole run, the fasteners aren’t holding and the rails may be split. A few loose boards is a repair; a whole section letting go is a replacement sign.
- A gate that drags or won’t latch. Sagging gates usually mean the gate post has shifted or the hinge side is failing, and a gate that won’t close is a security problem as much as a convenience one. It also gets worse every season.
- Visible rot, termites, or soft wood at the base. Fullerton’s wet winters and dry summers cycle wood hard, and rot at the soil line spreads up the post faster than most homeowners expect. If you can push a screwdriver into the wood at the base, the post is done.
- Neighbors, HOA, or the city flagging the fence. A leaning or mismatched fence can draw an HOA notice or a code letter, and the fix has a deadline attached. We can pull the details straight and get the run compliant.
Our Fence Installation Process – Step by Step
- 1
Free on-site estimate with a written price. We walk the property line, measure the run in linear feet, note the fence type and height, and check for slope, obstructions, and buried utilities before we quote. You get a flat written price and a written scope, not a range with room to move.
- 2
Permit and utility check. Fullerton fences over the standard height, and most front-yard fences, need a permit, and we confirm the setback and height rules before ordering material. We also call 811 to mark buried lines so no post goes into a gas or irrigation line.
- 3
Removal and site prep. We pull the old fence and footings, clear the line, and set the string line and grade so the new fence runs true. On slopes we rack or step the panels deliberately rather than letting gaps open at the bottom.
- 4
Post setting and panel installation. Posts go in concrete at the depth the soil and fence weight call for, and we let them cure before hanging panels. Rails, pickets, and panels go on square, with fasteners set to the material: screws on cedar, hidden fasteners on vinyl and composite, brackets on aluminum and iron.
- 5
Walkthrough and documented photo record. We walk the finished run with you, confirm the gate swing and latch, and hand over the photo record of the footings, posts, and finished fence. If anything isn’t right within 365 days, the Done Right Promise covers it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Fullerton?

A typical residential fence installation in Fullerton runs $3,500 – $9,000 for a standard lot, with vinyl and wood landing in that band and aluminum or iron pushing toward the top depending on height and gate count. A wood privacy fence on 100 – 150 linear feet commonly lands around $4,000 – $7,500, while aluminum fence installation typically runs $4,000 – $10,000 for the same run, and iron or ornamental work prices higher on the per-foot material. Chain link is the budget option on long side-yard runs. Small repair jobs that don’t need a new fence usually fall well under the $3,500 floor.
What moves the price: linear footage, fence height, post spacing, gate count, slope (a run that needs a retaining transition costs more than a flat one), old-fence removal and disposal, and whether the job needs a permit. To avoid overpaying, get the price in writing with the footage and material spec spelled out, and ask what’s included in removal and disposal. A free estimate from us lays out the line items and leaves nothing to guesswork. Under Clause 1 of the Haven Standard, your price is written before anyone starts, and nothing changes without a signed change order. Call (844) 320-7095 for an exact quote.
Fence Installation Near Fullerton – Our Service Area
We work fence installation across Fullerton and the surrounding north Orange County cities, including Placentia, Brea, Anaheim, Yorba Linda, and Orange, with jobs also running down to Santa Ana, Tustin, and Irvine. Response times depend on the run and material, and every estimate is scheduled around your availability. If you’re comparing options nearby, see our Fence Installation in Placentia page, or check Fence Installation in Newport Beach for coastal fence work where salt air changes the material call.
Serving Fullerton, CA – Our Local Coverage Area
We serve Fullerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Fullerton

Fence installation is the process of setting posts in footings, hanging rails and panels, and building gates to create a property boundary, privacy screen, or security barrier on your lot. It covers material selection, layout, permitting where required, and the physical build, and it’s different from fence repair, which fixes an existing run. We handle the whole job, from measuring the line to the finished walkthrough with the photo record.
A standard residential fence run usually takes one to three days on site, depending on footage and material. Wood and chain link go faster than vinyl or iron, and jobs that need a permit add time on the front end for the city review. Weather and slope can stretch the build, and we tell you the expected schedule in writing before we start. Call (844) 320-7095 to get a timeline for your run.
Fence installation in Fullerton typically runs $3,500 – $9,000 for a standard residential lot, with vinyl and wood in that band and aluminum or iron pricing higher depending on height and gates. Linear footage, fence type, slope, old-fence removal, and permitting are the main drivers. We give you a flat written price with the scope spelled out before work begins. Call (844) 320-7095 for an exact quote – estimates are free.
Yes, we work with PGT and CGI gate and latch products and know where those systems wear out over time. We can match or repair existing hardware, or spec a replacement that fits the fence you’re building. If you have a different make, we can work with that too. Call (844) 320-7095 to schedule a look at your gate.
Fence installation is planned work, not emergency work, so we don’t promise same-day installs on new fence runs. What we do offer is a free on-site estimate scheduled around you and a live person answering calls 24/7 when you need to reach us. Storm or vehicle damage to an existing fence is worth calling about quickly so we can assess repair versus replacement. Call (844) 320-7095 to start the conversation.
Every fence installation is covered by our 365-Day Done Right Promise: if it isn’t done right, we make it right within the year, backed by The Haven Standard and printed on every page, not an asterisk. You also get a written warranty on the work at the walkthrough, along with the documented photo record of the build. Call (844) 320-7095 for the warranty details on your specific job.
Clear the fence line of furniture, plants, and anything you want to keep, and make sure we can reach the property line with equipment and materials. If you know where sprinkler lines or utilities run near the fence, tell us before we call 811, and let us know about any HOA or neighbor concerns beforehand. Beyond that, you don’t need to do anything; we handle the removal, disposal, and site cleanup. Call (844) 320-7095 if you have questions before the crew arrives.
Schedule Your Fence Installation Service in Fullerton Today
If your fence is leaning, rotting, or just past its time, the next step is a free on-site estimate with a written price in your hand. Call (844) 320-7095 to schedule your free estimate. We’ll measure the run, check the post footings, and lay out your options with real numbers before any work starts. A live person answers calls 24/7, and every visit comes with a documented photo record. Bring a competitor’s quote and we’ll review it line by line at no charge. To see the rest of our work in the area, visit our home page, or check Fence Installation in Fullerton for service details and related projects.
Written by the team at Rowan Construction Group.












