







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fullerton Homeowners Choose PGT Construction
Rowan Construction Group Fullerton provides independent PGT service, repair, and installation across Fullerton – impact windows, aluminum sliding doors, and the doors and windows that tie them into a whole-house replacement. We’re not affiliated with PGT and not authorized by them. What sets our PGT work apart is that we read the labels and glass stamps before we quote, so the scope matches the actual product on your wall instead of a generic replacement assumption.
PGT built its reputation on impact-rated WinGuard aluminum and vinyl systems engineered for Florida wind-borne debris and coastal wind loads – very different criteria from what most Fullerton homes were built around. A 1920s Craftsman near Old Towne was framed for a mild climate, not a Santa Ana event, and understanding that gap is where independent PGT expertise earns its place. We serve the flats, the hills, and everything between. Call (844) 320-7095 to schedule your free estimate.
Why Trust Rowan Construction Group Fullerton for Your PGT Construction?

Our technicians have up to 19 years of experience with aluminum and vinyl window and door systems, and they know the PGT lines by name: WinGuard impact-rated aluminum and vinyl units, the Aluminum Series sliding glass doors and windows (the 3700/3900-style profiles many Fullerton homes carry), the Vinyl Series double-hung and slider windows, and the Premier Aluminum and Architectural Series custom units. That familiarity matters because each of these has its own failure curve.
Parts sourcing goes first to PGT-compatible OEM or equivalent-spec insulating glass units, rollers, sweeps, and locking hardware. Impact-rated assemblies are built as matched systems – mismatched glass or hardware can void the performance the unit was engineered for – so we source to spec rather than to whatever fits the opening. Under Clause 1 of the Haven Standard, the written price comes before anyone picks up a tool, and no change proceeds without a signed change order. Every visit includes a documented photo record as a standard deliverable, and the 365-Day Done Right Promise stands behind the work. Background-checked, uniformed technicians; a live person answers calls 24/7. All of this is warranty-safe service: we work to preserve your PGT warranty rather than compromise it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Fullerton
These are the PGT issues we see most often around Fullerton, and what usually causes them:
- Fogged or failed insulating glass units on PGT impact windows. A milky haze between the panes is a seal breakdown and desiccant saturation – a glass problem, not a frame problem. The glass stamp tells us the original spec, and the fix is a replacement IGU, not a whole new window.
- Roller and track wear on PGT aluminum sliding glass doors. Binding, hard operation, or a dropped sash on the 3700/3900-style sliders usually traces to worn rollers and a fouled track. Fullerton’s dry heat and dust accelerate the wear; rebuilding the rollers and cleaning the track restores smooth glide without pulling the frame.
- Weatherstrip and sweep deterioration on PGT sliders and swing doors. Failing sweeps and weatherstrip let air, water, and insects in – most noticeably during Santa Ana wind events, when Fullerton’s hillside homes catch the gusts head-on. Replacing the sweeps and weatherstrip is a small job with an outsized effect on comfort.
- Finish and hardware corrosion on PGT aluminum frames. Impact-rated hardware and lock mechanisms on aluminum frames can corrode and seize over time; we assess the finish and hardware and replace the components that are past their service life.
- Screen and lock mechanism failures on PGT vinyl and aluminum units. A sticky lock or a torn screen is often a precursor to a bigger water-intrusion issue at the sill. We check the sill and drainage while we’re there.
PGT Parts & Our Repair-vs-Replace Approach

We don’t claim to stock PGT parts locally; instead, parts are sourced per job – OEM or equivalent-spec insulating glass units, rollers, sweeps, and locking hardware that match the unit’s original engineering. This is deliberate. Impact-rated assemblies are matched systems, and substandard glass or hardware undercuts the very performance you paid for. When we source to spec, the unit keeps working the way it was designed to.
On repair versus replace, we tell you the truth. When a PGT unit is a one-off size or an older discontinued profile, targeted repair of the operable parts – glass, rollers, sweeps, locks – is often the right answer, and a good pro will say so rather than push a whole-house order. When the frame or structural condition makes repair uneconomical, we’ll tell you that too. Call (844) 320-7095 for a free estimate and an honest read on which way your PGT units point.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We read the product labels and glass stamps, identify the PGT line, inspect the sill and drainage, and record the condition in photos – so the scope matches the actual system.
- 2
Written scope and price. Under Clause 1, we hand you a flat written price with a written scope before any work starts. No “call for a quote.”
- 3
Repair or install. We replace the failed IGU, rebuild rollers and tracks, renew sweeps and locks, or install the new PGT unit – sourced to spec, warranty-safe.
- 4
Test. Operate the window or door through its full range, confirm the latch pulls flush, verify drainage, and photograph the result for your record.
- 5
Warranty. You leave with a written warranty and the photo record. That’s the 365-Day Done Right Promise, in writing.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Fullerton
We service and install the full PGT residential range: WinGuard impact-resistant aluminum and vinyl windows and doors, the Aluminum Series sliding glass doors and windows, the Vinyl Series double-hung and slider windows, and Premier Aluminum and Architectural Series custom door and window units. On Fullerton homes edging the hills, we pair impact-rated PGT units with Class A roof assemblies and ember-resistant vents so the envelope works as one system – window replacement and roof replacement coordinated rather than sequenced by guesswork, given how Fullerton’s dry heat and Santa Ana winds drive both.
We Also Service These Brands
Rowan Construction Group Fullerton is a multi-trade contractor, not a single-brand shop, so you can put the glass, roof, and hardware on one written scope. Alongside PGT, our trades work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems, and Master Halco fencing and gates. One call, one quote, one documented record for the project.
FAQs – PGT Construction Service in Fullerton

Is Rowan Construction Group Fullerton authorized by PGT? No. We’re an independent PGT service provider and are not affiliated with or authorized by PGT. We work with PGT products the way any qualified independent contractor does – by reading the labels, sourcing to spec, and servicing the product as engineered.
Do you use genuine PGT/OEM parts? We source PGT-compatible OEM or equivalent-spec insulating glass units, rollers, sweeps, and locking hardware for each job. Impact-rated assemblies are matched systems, so we source to spec to preserve the performance the unit was built for. Parts are sourced per job, not stocked locally.
How long does PGT service take? A single insulating-glass unit or roller rebuild is typically a short visit; a full-frame window or door replacement runs longer and is scheduled with a written scope first. We give you the timeline in writing before work starts, not after.
What PGT models/series do you cover? WinGuard impact-resistant aluminum and vinyl windows and doors, the Aluminum Series (3700/3900-style) sliders and windows, the Vinyl Series double-hung and sliders, and Premier Aluminum and Architectural Series custom units.
Will service void my PGT warranty? We work warranty-safe – matching original specs and documenting each step with photos – so the service doesn’t compromise the coverage your unit carries. Bring the paperwork and we’ll review it with you.
How much does PGT construction cost in Fullerton? It depends on the scope, and we put real numbers on the page so you can compare. Here are the market-calibrated ranges for the work most tied to PGT:
| Service | Typical Fullerton range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 320-7095 for an exact quote – estimates are free, and a written price comes before any work starts.
Should I replace my roof before or after installing new PGT windows and doors? Replace the roof first when it’s near end of life. New roofing can disturb wall edges and flashing around window openings, so doing the roof first protects the new PGT units and lets the window flashing tie into a sound roof plane. Call (844) 320-7095 for a free estimate and we’ll sequence it correctly for your Fullerton home.
Book Your PGT Service in Fullerton, CA
Whether it’s one fogged WinGuard pane, a dragging PGT slider, or a whole-house window and roof upgrade, call (844) 320-7095 to schedule your free estimate in Fullerton. You’ll get a written price before work starts, a documented photo record when we leave, and the 365-Day Done Right Promise behind it all. One call, one number, on the page.
Written by the team at Rowan Construction Group Fullerton.












