







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fullerton Homeowners Choose Toto Construction
Rowan Construction Group Fullerton provides independent Toto service and installation across Fullerton – diagnosing, repairing, and replacing Toto toilets, Washlet bidet seats, and the tile-and-fixture work around them. What sets our Toto work apart is model-level accuracy: we match fill valves, flush towers, and gaskets to the exact series in your home, not to whatever fits. We are not affiliated with or authorized by Toto, and we say so plainly. But we work on these fixtures every week across Fullerton’s older housing stock, from pre-war bungalows near Old Towne to the tract homes south and east. Call (844) 320-7095 for a free estimate.
Why Trust Rowan Construction Group Fullerton for Your Toto Construction?

Our technicians have up to 19 years of experience, and a good share of that time has been spent with Toto’s residential lines: the Ultramax II (MS604114CEFG), the Drake II (CST454CEFG), the Vespin II and Aquia IV series, and the Washlet C5 and S550e seats. That matters because Toto parts are specific. A G-Max or E-Max flush system is not interchangeable with a generic flapper assembly, and swapping in the wrong component is how a weak flush becomes a chronic one.
We source OEM-compatible parts for anything that touches flush performance or fit, so the toilet behaves the way it did when it was new. For non-critical items – supply lines, wax rings – quality aftermarket is fine and keeps the number honest.
Every visit includes a documented photo record of what we found and what we replaced, and you get a written price before any work starts. Under Clause 1 of the Haven Standard, the number is in writing first, every time. That’s what you get when you call Rowan Construction Group Fullerton.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Fullerton
- Running or phantom-flushing on Ultramax II and Drake II toilets. This is almost always fill valve or flush tower wear inside the G-Max or E-Max system, not a bowl problem. The valve keeps topping off the tank after the flush cycle ends, and you hear water running at odd hours.
- Weak flush on two-piece Toto units. A failing flush tower gasket lets water bleed past the seal, so less volume reaches the bowl. Owners often assume the trapway is clogged; usually it’s the flush mechanism.
- Washlet C5 and S550e spray problems. Clogged or scaled nozzles drop spray pressure long before the unit fails. Seat sensor faults on the S550e show up as the seat not detecting use or refusing to activate.
- Supply line and tank-to-bowl leaks. Degraded tank bolts and rubber gaskets on two-piece Toto toilets drip onto the floor, and the leak gets mistaken for a cracked tank. It rarely is.
- CeFiONtect finish staining. In high-mineral water, Toto’s glaze holds up well but still collects stubborn staining that owners blame on the toilet. It’s the water, and the fix is maintenance, not replacement.
Here’s how a typical job goes. A Toto Ultramax II or Drake II that runs intermittently or flushes weakly is usually suffering from a worn fill valve or failing flush tower gasket, not a problem with the bowl or trapway. A qualified local pro shuts off the supply, drains the tank, replaces the OEM fill valve and flush tower components, checks the supply line and tank bolts, and confirms refill level and flush volume are back to spec. On a Washlet, decreased spray pressure or a sensor fault usually points to scaled nozzles or a failed seat sensor; the usual fix is nozzle cleaning or replacing the seat unit if the electronics are out of warranty.
Toto Parts & Our Repair-vs-Replace Approach

We use genuine Toto OEM fill valves, flush towers, and gaskets for toilets, and genuine Washlet components where they’re available – because these are the parts that hold fit and performance. Aftermarket is acceptable only for non-critical items like supply lines and wax rings. We claim no local parts stock; parts are sourced per job, and we tell you up front what it costs and how long it takes.
Repair or replace comes down to honest arithmetic. If the flush system needs a valve and gasket, that’s a repair every time. If a Washlet’s electronics or pump fail out of warranty, we compare OEM replacement cost against a new unit and give you both numbers in writing. We don’t upsell a toilet because a $40 part wore out. Call (844) 320-7095 and we’ll price both paths for you.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model – Ultramax II, Drake II, Vespin II, Aquia IV, or a specific Washlet – and test the flush system, supply, and seat electronics against that model’s spec.
- 2
Written price and scope. You get a flat written price and written scope before any work begins. No work proceeds on a change until the change order is signed.
- 3
Repair or installation. OEM parts go in for flush and Washlet work; we check tank bolts, gaskets, and supply lines while we’re in there.
- 4
Test and verify. We confirm refill level, flush volume, and Washlet spray and sensor function, then hand you the documented photo record of what was found and done.
- 5
Warranty. The work is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Fullerton
We cover Toto’s Ultramax II one-piece elongated toilet, the Drake II two-piece, and the Vespin II and Aquia IV series. On the Washlet side, the C5 and S550e electronic bidet seats. Around the fixture, we install the tile and fixtures, vanities, and walk-in showers that Toto toilets and Washlets live in – so a bathroom update can keep a good Toto toilet and rebuild the room around it. If you’re remodeling in Fullerton and want to keep your Toto, we’ll tell you whether it’s worth keeping.
We Also Service These Brands
Toto is one brand among many we handle. We also service and install KraftMaid cabinetry, Kohler plumbing, GAF roofing, and PGT windows, so a single written quote can cover the fixture and the room around it. That multi-brand range means you’re not hiring a specialist for the toilet and another contractor for the tile, vanity, and shower sitting next to it in the same Fullerton bathroom.
FAQs – Toto Construction Service in Fullerton

No. We’re an independent Toto service provider, not affiliated with or authorized by Toto. We work on Toto fixtures with OEM parts and model-specific knowledge, but we don’t represent the manufacturer. Call (844) 320-7095 for a free estimate.
Yes, for anything critical – fill valves, flush towers, gaskets, and Washlet components. Aftermarket is fine only for non-critical items like supply lines and wax rings.
A toilet service-part repair is typically a single visit. Washlet diagnosis and repair may run longer if a seat unit has to be replaced. We give you the timeline in writing before work starts.
Ultramax II, Drake II, Vespin II, and Aquia IV toilets, plus Washlet C5 and S550e seats, along with the tile, vanity, and shower work around them.
Using OEM parts and proper installation practices is the warranty-safe path, and that’s what we do. We can’t speak for Toto’s determination on a specific claim, but we keep your service documented – including the photo record – so you have evidence if a warranty question comes up. Call (844) 320-7095 to schedule.
Fixture service and installation sits inside our bathroom pricing, which depends on scope. Here are the standing ranges so you can plan before you call:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
Call (844) 320-7095 for an exact quote – estimates are free, and you get a written price before any work starts.
No. It’s usually a worn fill valve or failing flush tower gasket in the G-Max system, not the bowl. Replacing those OEM components restores flush performance. Call (844) 320-7095 for a quote.
Often, yes. Spray pressure usually means scaled nozzles; seat sensor faults may be repairable or may call for a new seat unit if the electronics are out of warranty. We price both sides in writing.
OEM for critical parts, sourced per job. We don’t claim local stock, but we tell you the lead time before work begins.
Fullerton’s hard water scales Washlet nozzles and stains CeFiONtect surfaces faster than soft water would. Regular nozzle cleaning and a filter change help, and we check the finish during service.
Usually keep it. A Toto with sound porcelain and working flush parts is worth keeping; we rebuild the room around it and tell you honestly if a replacement makes more sense. Call (844) 320-7095 for a free estimate.
Book Your Toto Service in Fullerton, CA
If your Toto is running, flushing weak, or the Washlet isn’t spraying like it should, call Rowan Construction Group Fullerton at (844) 320-7095. You’ll get a free estimate, a written price before any work starts, OEM parts matched to your model, and the 365-Day Done Right Promise behind the job. We answer the phone 24/7 and serve Fullerton and the surrounding area.
Written by the team at Rowan Construction Group.












