A Rowan company - serving Fullerton, CA

CGI Driveway & Pavers in Fullerton: A Homeowner’s Guide

November 18, 2026 • Rowan Construction Group Fullerton

CGI Driveway & Pavers in Fullerton: A Homeowner’s Guide

CGI Driveway & Pavers in Fullerton: A Homeowner’s Guide

CGI’s technical installation manual calls for a polymeric sand joint width of about 1/8 inch. Most residential installs we’ve inspected across Southern California run closer to 3/8 inch, and that gap is where edge creep, sand washout, and loose pavers show up within two rainy seasons. Fullerton sits at the mouth of the Coyote Hills, where clay-heavy soil swells in winter and shrinks hard in summer, so a wide joint doesn’t just look sloppy here. It gives water a place to sit and work the base loose. This guide documents what a correct CGI installation actually looks like, item by item, so you can check the work before you sign off and pay. If you’d rather not climb into the details yourself, call (844) 320-7095 and we’ll walk your driveway with you.

Call (844) 320-7095

Key Takeaways

  • CGI pavers come in named series, and the series you pick matters less than the thickness: 60mm is standard driveway duty, 80mm is what you want under an RV or a heavy diesel pickup.
  • CGI’s warranty documentation ties coverage to a compacted aggregate base of at least 6 inches for pedestrian and light-driveway use, and 8 inches or more for vehicular loads over an unstable subgrade. Confirm the depth before a single paver goes down.
  • Edge restraint is not a place to save money. A spike-only restraint where CGI specifies an adhesive-set system can put your warranty in question.
  • Joint width, sand cure time, and the sealer window are the three inspection points most homeowners never check.

What are the CGI paver series, and which one belongs on a Fullerton driveway?

A new multi-panel patio door opening a kitchen to the patio

CGI makes a range of concrete paver lines, and each one is suited to a different job. For a residential driveway in Fullerton, the question is less about color and more about thickness and load rating, because that’s what determines whether the pavers stay flat after a few seasons of a three-quarter-ton truck parking on them. Here’s the breakdown that matters:

  • Standard 60mm pavers are the workhorse for a standard two-car driveway, a walkway, or a patio. They handle passenger vehicles and foot traffic well when the base is right.
  • Heavy-duty 80mm pavers are what you want under an RV pad, a trailer, or a driveway where a heavy pickup or work truck sits regularly. The extra 20mm of concrete resists the point-loading that cracks thinner units.
  • Permeable and specialty lines handle drainage-sensitive spots. Fullerton’s older neighborhoods near downtown have tight lots and limited runoff, so a permeable section near a garage apron can keep water out of the slab.

What you’ll notice is that a contractor quoting you a “CGI driveway” without naming the series and thickness is quoting a look, not a spec. Ask for both on the written quote. When you compare bids, a 60mm price and an 80mm price aren’t the same job, and the difference shows up five years in, not on day one. If you’re weighing pavers against a poured slab, our Driveway & Pavers in Newport Beach page covers the same trade vocabulary and how we scope the base for coastal and inland soil alike.

How deep does the base need to be, and how do I confirm it before the first paver is set?

CGI’s warranty documentation requires a compacted aggregate base, and the depth is what most installs get wrong. For pedestrian and light-driveway use, you’re looking at 6 inches of compacted base minimum. For vehicular traffic over Fullerton’s expansive clay soil, especially near the hills where the grade moves, 8 inches or more is the number that keeps the surface from heaving. The base should be a graded aggregate like Class II base rock, compacted in lifts, not dumped in one pass and raked flat.

Here’s how you confirm it without being a contractor:

  1. Ask for the base depth in writing on the quote before work starts. A flat price with a written scope includes the base spec.
  2. When the crew excavates, look at the open trench before any gravel goes in. Measure from the subgrade up to the finished grade string. That’s your total, and base plus bedding plus paver thickness should add up to it.
  3. Watch for compaction in lifts. A plate compactor should pass over the base in layers, not one deep dump.
  4. Photograph the open excavation. It’s the one stage you can’t re-check later.

In our experience, the crew that lets you see the base is the crew that built it right. If a contractor hurries you past the excavation stage, that’s your answer.

How do I read a CGI batch code to check material consistency?

New double-hung windows in a dining room

CGI stamps a batch or lot code on each pallet, and that code is how you confirm every pallet on your job came from the same production run. Color variation between batches is normal for concrete pavers, but a driveway paved from two different runs can show a visible seam line and a slight tone shift once it’s down and sealed. On a multi-pallet order for a Fullerton driveway, that seam tends to land right where the truck parks.

What to do: ask the installer to keep the pallet codes tracked and to lay out pavers from multiple pallets together before setting them, a practice called blending. Check the codes yourself against the delivery ticket. If two codes show up and the crew plans to pave one side of the driveway from each, ask them to blend instead. It costs nothing and it’s the difference between a driveway that reads as one surface and one that reads as two.

Thickness, batch, and base: what the written quote should name

  • Paver series and thickness (60mm or 80mm)
  • Batch code or lot number on the delivery ticket
  • Base depth in inches and aggregate type
  • Edge restraint system by name
  • Joint sand spec and sealer product

A quote that lists all five is a quote you can hold someone to. One that says “CGI pavers, installed” is a quote you can’t.

Which edge restraint does CGI recommend, and why does substituting void the warranty?

Edge restraint is the hidden system that holds the whole field of pavers together. CGI specifies adhesive-set and concrete-embedded restraint systems for driveway applications, and the substitution to watch for is a spike-only plastic edge, the kind that gets pinned into the base with long steel spikes and nothing else. Spike-only restraints work on pathways. On a driveway taking daily vehicle load, they loosen, and a loosened edge lets pavers spread outward, opening the joints at the perimeter. That’s the edge creep you see as a wavy line along the driveway apron.

CGI’s product warranty documentation ties coverage to proper installation, and an edge system that doesn’t meet the spec can put your warranty in question. The fix is cheap: specify the restraint by name on the quote and verify it’s what shows up. If you’re also fencing the property line while the driveway crew is on site, the same documentation discipline applies to Fence Installation in Newport Beach, where post depth and set matter as much as the panel.

What should a completed CGI installation inspection checklist look like?

A new front entry door with glass sidelights

When the crew finishes, you sign off on the job. That sign-off should be backed by a written record, and the checklist below is what a correct CGI installation in Fullerton should satisfy before you make the final payment. This is the point where most homeowners hand over a check and hope, and it’s the point where documentation earns its keep.

  1. Joint width: Measure 1/8 inch between pavers in a few spots. If joints are running 3/8 inch or wider, ask why before the sand goes in. Wide joints are where the sand washes out and the pavers shift.
  2. Sand cure: Polymeric sand needs time to cure before traffic. Ask the crew for the cure window in writing, typically 24 to 48 hours depending on weather, and keep vehicles off until it’s passed.
  3. Sealer window: Sealer goes on after the sand cures and the surface is dry. Sealing too early traps moisture and turns the joint sand milky. Ask for the sealer product name and application timing.
  4. Edge restraint: Confirm the restraint system matches the quote and that it’s set, not just spiked and forgotten.
  5. Photo record: Ask for photos of the base, the edge, and the finished joints. That record is what you show if a warranty question comes up later.

We keep a documented photo record on every visit as a standard deliverable, not an add-on, because the record is the only thing that survives the crew leaving.

When to call a pro

If the excavation is already open and you’re not sure about the base depth, or a contractor is pushing you to skip the edge restraint spec, stop and get a second opinion. We offer a free review of any written estimate, line by line, at no charge. Compare bids with the checklist above in hand.

Related services in Fullerton: Home Additions & ADU in Newport Beach for homeowners who are already reworking the property around a new driveway, and our Rowan Construction Group Fullerton home page for the full trade list.

The Bottom Line

CGI driveway pavers in Fullerton are only as good as the base under them, the thickness of the units you pick, and the edge restraint that keeps the field from spreading. Name the series and thickness on the quote. Confirm the base depth at excavation. Check the batch codes. Verify the restraint system. Walk the joint width, sand cure, and sealer window before you sign off. Do those five things and your CGI pavers will still be flat and tight after a decade of Fullerton winters. Skip them and you’ll be re-reading this guide two rainy seasons from now.

If you’re in Fullerton and want a written price before anyone picks up a tool, we offer free estimates. Call (844) 320-7095 to schedule yours.

Frequently Asked Questions

Need Construction Help?

Call Rowan Construction Group Fullerton - the local pro we connect you with is licensed and insured, here with fast after-hours help in Fullerton.

(844) 320-7095
Local Service Coverage

Request a Free Estimate in Fullerton

Tell us what you need - Rowan Construction Group Fullerton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch