







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fullerton Homeowners Choose Belgard Construction
Rowan Construction Group Fullerton is an independent Belgard installer serving Fullerton, CA. We set Belgard Lafitt Rustic Slab, Catalina Grana, Mega-Lafitt and Weston Stone systems, and every Belgard job we quote starts with the condition of the base, the slope, and the drainage underneath it – because that’s where these systems actually fail on Fullerton soil. A written flat price comes before any work starts, and you get a documented photo record of the base, the edge restraint and the finished surface when we’re done.
To be clear about what we are: Rowan Construction Group Fullerton is not a Belgard dealer, an authorized installer, or a Belgard warranty representative. We’re an independent construction contractor that works with Belgard product families and quotes what your site needs. Call (844) 320-7095 for a free estimate.
Why Trust Rowan Construction Group Fullerton for Your Belgard Construction?

Our technicians have up to 19 years of experience setting interlocking pavers and segmental retaining walls, and much of that time has been spent on Belgard lines sold across Southern California. That familiarity shows up in small things. We know the Lafitt Rustic Slab profile has a textured face and irregular edge that makes restraint detail more important, not less. We know Catalina Grana’s larger format amplifies any grade error underneath it, so a slab that’s flat when new can hold water six months later if the base wasn’t compacted in lifts. And we know Mega-Lafitt and Weston Stone walls live or die on what’s behind the courses – wall rock, drainage aggregate, geogrid where the engineering calls for it.
For parts and materials, we work to Belgard spec: matching pavers and wall units for the existing line and color, manufacturer-spec polymeric sand, edge restraint, wall rock and geogrid for the base assembly. We’re not going to slip in a generic paver and call it a blend. The 365-Day Done Right Promise covers the work: if it isn’t done right, Rowan makes it right, backed by The Haven Standard rather than a handshake. And under Clause 1, no work proceeds on a change until you’ve signed the change order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Fullerton
Belgard systems are engineered assemblies, and most of the failures we’re called out to inspect trace back to the layer nobody sees after the job is finished. Here’s what we find most often around Fullerton.
- Lafitt Rustic Slab joints opening and edges chipping. This usually means the base was installed too thin over expansive clay subgrade. Fullerton’s clay swells and shrinks with seasonal moisture, and a two-inch base over moving soil gives the pavers nowhere to sit. The result is joints that widen, sand that migrates out, and corners that spall at the field edge.
- Catalina Grana pavers settling and puddling at low points. When slope and drainage weren’t re-graded to move runoff to the street or a yard drain, water finds the low spot and stays. Larger-format Catalina Grana makes this more visible because a slight dip spreads across a wide plane.
- Efflorescence and salt bloom on gray-toned pavers and wall block. That white powder is mineral salts drawn to the surface through wet-dry cycles. Irrigation overspray hitting the same wall face twice a day is a common driver in Fullerton, where long dry spells and heavy winter rain push moisture in and out fast.
- Mega-Lafitt and Weston Stone walls bulging or leaning. Segmental walls lean when geogrid, wall rock and drainage aggregate were left out behind the courses. Water pressure and soil movement push the wall face out, and no amount of re-capping fixes the cause.
- Polymeric sand washing out or cracking within a season. Sand set over pavers without proper compaction and edge restraint has nothing holding it in place. Edge restraint is the missing piece most often, and without it the pavers creep and the joints open.
Belgard Parts & Our Repair-vs-Replace Approach

When a Belgard patio or wall needs work, we match what’s already there. That means Belgard-spec pavers and wall units in the same line and color so the repair blends into the field, plus manufacturer-spec polymeric sand, edge restraint, wall rock and geogrid for the base assembly. We don’t keep Belgard stock on hand – materials are specified per job and sourced to match your existing product, which is the only honest way to promise a color and profile match.
The repair-vs-replace call is simple in principle. If the base is sound and the failure is surface-level – worn sand, a few chipped units, isolated settling – a targeted repair is the right spend. If base failure or wall movement is the real problem, we’ll say so. Top-dressing sand over a bad base or swapping a few capstones on a leaning wall buys a season at best. Rebuilding that section properly is the cheaper decision over time. If you want a second read on a competitor’s quote, our Free Second Opinion will review it line by line at no charge. Call (844) 320-7095 to set one up.
Our Belgard Service Process – Step by Step
Every Belgard job follows the same sequence, whether it’s a patio repair or a new driveway in Fullerton.
- 1
Diagnosis. We look at the base, the slope and the drainage before anything else – where water’s going, what the subgrade is doing, whether the edge restraint is intact. You get a documented photo record of what we found.
- 2
Written scope and flat price. Before a tool comes out, you get a written flat price with a written scope and a written warranty. Any change gets its own change order, signed before work proceeds.
- 3
Repair or install. Affected pavers or wall courses come up, the base is re-excavated and compacted in lifts, grade is set to move water away from the house, and the Belgard units go back down with edge restraint and fresh polymeric sand.
- 4
Check. We water-test for ponding, verify slope away from the foundation, and check that downspouts and irrigation aren’t feeding the same problem again.
- 5
Warranty handoff. The 365-Day Done Right Promise covers the work. If something’s off, Rowan makes it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Fullerton
We work across the Belgard families common in Southern California hardscape. That covers Lafitt Rustic Slab pavers; Catalina Grana pavers; Mega-Lafitt wall block; and Weston Stone wall block. Services on this page run from Paver Patio Installation and Paver Driveway Installation to Home Addition work that connects new hardscape to the existing structure. Hillside Fullerton properties in Raymond Hills and Hillcrest often need retaining-wall and slope-drainage work tied into any addition before plan check clears, and that’s a Belgard wall conversation as much as a grading one.
We Also Service These Brands
Belgard is one piece of the work. Rowan Construction Group Fullerton also installs and services KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows and doors – brand lines we source through a network of more than fifty vetted manufacturers. That means a patio project can sit alongside a kitchen or roof scope without a second contractor and a second set of change orders.
FAQs – Belgard Construction Service in Fullerton

No. Rowan Construction Group Fullerton is an independent installer, not a Belgard dealer, authorized installer or warranty representative. We work with Belgard product families and quote the base and drainage conditions your site actually has.
Yes, where the job calls for a Belgard match we specify Belgard-spec pavers and wall units in the same line and color, plus manufacturer-spec polymeric sand, edge restraint, wall rock and geogrid. We don’t claim local Belgard stock – materials are matched to your existing product per job.
A targeted repair – re-setting a section of Lafitt Rustic Slab or re-sanding joints – usually takes one to two days; a full paver patio or driveway runs several days depending on square footage and base rebuild. Your written scope states the schedule before work starts.
We work with Lafitt Rustic Slab pavers, Catalina Grana pavers, Mega-Lafitt wall block and Weston Stone wall block, along with the base and restraint materials those systems need.
Repairs done to the same line, color and installation spec are the safest path to keeping your Belgard warranty intact. We’re not a Belgard warranty representative, so we recommend confirming coverage details with Belgard directly before work starts. We’ll tell you what we’re specifying and why.
Typical Fullerton ranges for the work we do on Belgard hardscape:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (844) 320-7095 for an exact quote – estimates are free.
Book Your Belgard Service in Fullerton, CA
A patio holding water or a wall that’s starting to lean is a base problem waiting to get worse. Rowan Construction Group Fullerton diagnoses what’s under the Belgard before quoting a repair, puts the price in writing, and photographs the base and finished surface so you have a record. Call (844) 320-7095 for a free estimate and a written, line-item price.
Written by the team at Rowan Construction Group Fullerton.












