







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Costs in Fullerton, CA – And Why the Box Decides the Number
Refacing a standard 10×10 kitchen in Fullerton runs $4,500 to $11,000, split into three named lines: doors and drawer fronts, veneer materials, and labor. A full kitchen remodel in Fullerton lands at $14,000 to $45,000, which is why so many homeowners near the Old Towne core ask about refacing first. But an estimate that skips an inspection of the cabinet boxes is a guess, and in a 1940s Fullerton bungalow that guess can be off by four figures. Call (844) 320-7095 for a priced walkthrough with photos of every box interior, and a written number before anything comes off the wall.

Why the Cabinet Box Changes the Price Before You Pick a Door
Fullerton sits on a rare mix of pre-war downtown stock, mid-century tracts, and hillside custom homes, and each one hides a different box problem. Near the Old Towne core, we regularly open kitchen cabinets from the 1930s and 1940s with solid-wood frames that have absorbed decades of steam and under-sink leaks. The face frames may look fine from the front; behind the stiles, the particleboard or plywood sides have swelled, softened, or pulled away from the fasteners.
New veneer has to bond to something stable. If the substrate crumbles when a screw bites in, or a door hinge no longer holds its position against a soft stile, refacing delivers a good-looking result that fails within a year. That is the whole reason a refacing quote can move $800 to $2,000 after demo – and why Rowan’s written quote names the box-condition assessment as its own line item so the number doesn’t shift once the work starts.
Here’s what an inspection actually looks for:
- Box interiors under the sink. Water staining, delamination at the bottom panel, and swollen toe-kick corners from slow leaks that went unnoticed for years.
- Face-frame flatness. A bowed stile means new veneer sits uneven, and doors rack out of alignment within months.
- Hinge screw bite. Stripped or softened hinge locations tell us whether the box can hold weight or needs localized reinforcement before veneer goes on.
- Square and plumb at the wall. Older Fullerton homes have settled; a box out of square by half an inch shows up at the corner seams once new doors are hung.
- Non-standard dimensions. Raymond Hills homes with custom upper-cabinet runs and vaulted ceilings often don’t fit standard refacing measurements at all.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. The inspection is where that price gets made honest. Any repair beyond the original scope gets its own signed change order, so nothing moves forward until you’ve seen the photo and agreed to the number.
Line-Item Refacing Costs for a Fullerton Kitchen
Rowan quotes refacing the same way it quotes a full kitchen remodel: door cost, material cost, and labor as separate rows, with brand names on each. KraftMaid and Wellborn are the two cabinet lines on most Fullerton refacing jobs, and they price differently: KraftMaid’s full-overlay doors run roughly 15 to 20 percent more than Wellborn’s framed equivalents, per door. You’ll see both quoted by name, not buried in a lump “materials” figure.
| Line item | Typical Fullerton range |
|---|---|
| Door and drawer fronts | $1,800-$4,200 |
| Veneer materials (sides, face frames, end panels) | $900-$2,400 |
| Labor (removal, prep, install, hang and align) | $1,500-$3,600 |
| Box-condition assessment (photo documented) | included |
| Localized box repair, when flagged | $300-$1,200 |
| Custom veneer for non-standard dimensions | $600-$1,800 |
| Full refacing total, standard 10×10 kitchen | $4,500-$11,000 |
| Cabinet installation (if you replace instead of reface) | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Full kitchen remodel (if refacing doesn’t fit the job) | $14,000-$45,000 |
That last row matters. Refacing saves you the cost of new boxes, but it doesn’t fix a bad layout, a missing drawer stack, or a kitchen that ends in the wrong place. When the geometry is the issue, Kitchen Remodeling with new cabinetry and countertops is the honest answer, and we’ll say so after the walkthrough instead of after a deposit.

Why Hillside Fullerton Kitchens Don’t Fit Standard Refacing Kits
Raymond Hills and Hillcrest homes carry cabinet runs that a kit manufacturer has no measurements for. Vaulted ceilings push the uppers to custom heights. Angled walls and bumped-out pass-throughs mean end panels that aren’t square. When a stock refacing package is forced onto those runs, the mismatched joints and filler strips are visible from across the room.
Rowan measures every run during the inspection and flags non-standard dimensions as a separate custom-veneer line in the written quote. Same for the dry-heat problem: our semi-arid climate, long dry summers, and periodic Santa Ana winds pull moisture out of older wood during the hot months. A veneer that “looked fine” in April can laminate peel at the edges by August if the box wasn’t stabilized first. Our crews bring that up before they touch a door.
The 365-Day Done Right Promise covers veneer adhesion and door alignment: if delamination or hinge drift shows up within the first year, we make it right at no charge, and the terms of that promise are printed on the signed close-out document, not kept somewhere off the page. Every visit, start to finish, includes a documented photo record as standard – not an add-on.
What to Expect on a Rowan Refacing Job
Project durations run three to five working days for a standard Fullerton kitchen. Here’s the sequence:
- Pre-quote walkthrough. We photograph every box interior, measure every run, and note anything that would change the scope.
- Written flat price with scope and warranty. Delivered before work starts, on every trade from refacing through home remodels. Free Second Opinion on any competitor’s written estimate, reviewed line by line at no charge.
- Signed change orders only. If a box repair surfaces while doors come off, the work stops until you’ve signed off on the added line.
- Install and alignment. Doors hung, hinges set, drawer fronts squared, every gap checked with a gap gauge.
- Close-out record. Photo documentation of what we found and what we did, plus the written 365-Day Done Right Promise.
Crews are background-checked and uniformed. A live person answers calls at any hour, and Rowan Construction Group Fullerton has technicians with up to 19 years of experience on cabinet work. The number stays on the top of every working document.
FAQs
Refacing a standard 10×10 kitchen in Fullerton runs $4,500 to $11,000, with door and drawer fronts, veneer materials, and labor as separate line items on the written quote. Box repairs or custom sizing for non-standard runs can add $300 to $2,000 depending on what the inspection finds. Call (844) 320-7095 and we’ll walk through your kitchen before any number goes on paper.
Yes, typically by several thousand dollars on the same footprint. Cabinet installation in Fullerton runs $4,000 to $13,000 on its own before countertops and any layout work, on top of a $14,000 to $45,000 full kitchen remodel range. Refacing skips the cost of new boxes and demolition, so it makes sense when the boxes are sound and the layout works. Call (844) 320-7095 – the walkthrough will tell you which path fits.
Often yes, but only after the damaged section is stabilized or replaced, and that repair appears as a separate line on the quote. Decades of under-sink leaks in pre-war Fullerton homes are common, and veneer won’t bond to swollen or soft particleboard. We photograph the box interior during the pre-quote inspection so you see the damage yourself before signing anything. Call (844) 320-7095 to schedule the inspection.
We fix it at no charge under the 365-Day Done Right Promise. Delamination and hinge drift are the two failure modes that show up first, which is why they’re explicitly covered and documented in writing at project close. Call (844) 320-7095 and we’ll schedule a return visit with the photo record on file.
Get a Written Refacing Price Before a Door Comes Off
Rowan’s founding discipline is simple: the price is written before anyone picks up a tool. That means a priced walkthrough of your Fullerton kitchen, photos of every cabinet box, and a flat number with the scope and warranty attached. No shifts after demo day unless you sign the change order. Call (844) 320-7095 for a free estimate and a scheduled inspection this week.
Written by the team at Rowan Construction Group Fullerton, serving Fullerton, CA.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Solid work, decent crew, and the site was left tidy every evening."
- Pearl A."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












